Table 2-2. GA302T LEDs
Label | Activity | Description |
|
|
|
DATA | Blinking | Brief bursts of data detected on the port |
| On | Streams of data detected on the port |
| Off | No data detected on the port |
|
|
|
1000 | On | Good 1000 Mbps Gigabit Ethernet link |
| Off | No 1000 Mbps link; possible link at different speed, possible bad cable, |
|
| bad connector, or configuration mismatch |
|
|
|
100 | On | Good 100 Mbps Fast Ethernet link |
| Off | No 100 Mbps link; possible link at different speed, possible bad cable, |
|
| bad connector, or configuration mismatch |
|
|
|
10 | On | Good 10 Mbps Ethernet link |
| Off | No 10 Mbps link; possible link at different speed, possible bad cable, |
|
| bad connector, or configuration mismatch |
|
|
|
Preparing to Install Your GA302T Copper Gigabit Adapter
Follow the instructions provided in this section for installing the GA302T Copper Gigabit Adapter in your server or workstation. For additional information about per- forming these tasks on your particular system, refer to the manuals
included with your system hardware.
Before installing your Gigabit Adapter:
1.Make sure that your system meets the hardware and software requirements provided in Table
2.Make sure that your system uses the latest BIOS.
3.Turn off the power to your PC.
If you are running Windows, close all applications and click Start from the desktop menu, select Shut Down, and then select Shut down the computer.
hardware installation | |
|
|
