NETGEAR GA302T manual Moving the Network Card to a Different Slot

Moving the Network Card to a Different Slot

Windows Me automatically detects the installation and removal of hardware.To move a GA302T Copper Gigabit Adapter to a different slot in the same system:

1.Shut down the system and remove the card from the PCI slot.

2.Install the card in its new PCI slot (see “Installing Your Copper Gigabit Adapter” on page 2-7).

3.When the system is powered on, reinstall the driver software (see “Installing the Driver Software” on page 3-1).

Windows Me driver software 5-7