Moving the Network Card to a Different Slot
Windows XP automatically detects the installation and removal of hardware. To move a GA302T Copper Gigabit Adapter to a different slot in the same system, you need to do the following:
1.Shut down the system and remove the card from the PCI slot.
2.Install the card in its new PCI slot (see “Installing Your Gigabit Adapter” on page
3.When the system is powered on, reinstall the driver software (see “Installing the Driver Software” on page
Removing the Driver Software
Under Windows XP, the driver software is automatically uninstalled when its hardware is removed.To remove a card, do the following:
1.Shut down the system and remove the card from the PCI slot.
2.When the system is powered on, the driver will be automatically uninstalled.
Windows XP driver software | |
|
|
