CHAPTER 7: WINDOWS NT 4.0 DRIVER SOFTWARE
This chapter provides information about the Microsoft Windows NT 4.0 driver software.
This chapter also gives directions for performing the following procedures:
•Installing the driver software
•Updating or reinstalling the driver software
•Moving the network card and removing the driver software
Installing the Driver Software
Your GA302T Copper Gigabit Adapter must be physically installed in the
server before installing the software driver. If you are installing more than one GA302T Copper Gigabit Adapter, you must perform the following procedure for each card.
To install the driver software if you are operating in a Windows NT 4.0 environment:
1.Start your Windows NT 4.0 system and log in.
You must have Network Administrator privileges to install the driver software.
2.On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
The Control Panel window opens, displaying a group of icons including the Network icon.
Windows NT 4.0 software | |
|
|
