NETGEAR GA621 Table 2-1. Software and Hardware Requirements (continued)

hardware installation 2-4

Table 2-1. Software and Hardware Requirements (continued)

System Requirements

NetWare

Hardware A Pentium-based server that meets NetWare 4.2,NetWare 5.0,or NetWare 5.1

software requirements

One open 32-bit or 64-bit PCI slot

Minimum 64 MB memory

Operating System If you are using NetWare 4.2,you must have the most recent support pack

(Support Pack 8 or later).To download the latest support pack,go to the following

Novell Web page:

http://support.novell.com/products/nw42/patches.htm

For NetWare 5.0,download the most recent support pack (Support Pack 4 or

later).To download the latest support pack,go to the following Novell Web page:

http://support.novell.com/products/nw5/patches.htm

Software GA621 Fiber Gigabit Ethernet Card driver software,version 1.0 (or higher)

(loaded during for NetWare,which is Included on the

driver installation)

in the \Netware directory.The necessary files are:

• Ga621.lan (network device driver file)

• Ga621.ldi (information used by installation program)

Red Hat Linux

Hardware APentium-based server that meets Red HatLinux 6.x or7.x software requirements

One open 32-bit or 64-bit PCI slot

Operating System Red Hat Linux 6.0,6.1, 6.2,7.0 and 7.1

Software GA621 Fiber Gigabit Ethernet Card driver software,version 1.0 (or higher)

(loaded during for NetWare,which is included on the

driver installation)

in the \Linux directory.The necessary files are:

• ga.c (Linux network OS specific module file)

• ga621.h (Driver header file)

• hsm.c (Hardware specific module file)

• hsm.h (Hardware specific module header file)

• nsm.h (HSM related data structures)

• nsmtypes.h (Definition type define)

• sp.c (Tunable parameters)

• Makefile Rules to compile and install the driver)