NetWare driver software 6-2
Pre-Installation Requirements
Before you can use the Gigabit Ethernet card in your NetWare system,you must
install the network device driver.
First,make sure that the Gigabit Ethernet card is physically installed on your system.
Typically,NetWare OS software must already be running on the server.Make sure
that your server meets the hardware and operating system software requirements
described in Table 2-1,w hich star ts on page 2-2.
Install the NIC into a PCI slot of a NetWare server and note the slot number (slots
are generally numbered top/front to bottom/back of the machine).You may need to
know the slot number later,when you configure the driver.
Install the latest support pack files to ensure the GA621 Fiber Gigabit Ethernet Card
will correctly function.The Support pack or patch file(s) needed for the
operating system running on your server are indicated in Table 6-2.
Table 6-2. NetWare Support Files
NetWare O/S File Name File(s) to Install
Version 5.0/5.1 Support Pack 4 NW5SP4.EXE (or latest file)
(or the latest support pack)
Version 4.2 Support Pack 8 NW4SP8A.EXE (or latest file)
(or the latest support pack)
Installing the Driver Software
To use the floppy drive to install the drivers,copy the Ga621.lan and Ga621.ldi files
from the
GA621 Fiber Gigabit Ethernet Adapter Driver and Document CD
onto a
floppy disk.
Insert the
GA621 Fiber Gigabit Ethernet Adapter Driver and Documentation CD
into the CD-ROM drive.