NETGEAR MA311 manual Profile, Configuration

Link Quality

Indicates how well the wireless node is communicating with the associated access point or another wireless node.

Profile

The Profile field allows you to set values for all parameters by selecting a previously defined profile. To create a profile, go to the Profile field, type in a Profile Name and set the corresponding parameters (SSID, WEP, etc.). After changing parameters, Save the profile and click the Activate button to put it into effect. If one of the profiles is no longer used, you may remove it by clicking the Delete button. You can have multiple profiles and modify a profile at any time.

Configuration
Network mode	Configurable between 802.11 Ad-hoc and Infrastructure modes. In 802.11 Ad-hoc
	mode, the wireless nodes form their own local network where the end nodes
	communicate peer-to-peer without an access point. In Infrastructure mode, the
	wireless searches all available wireless channels to associate with an access point.
SSID	Enter a 32-character (maximum) Service Set ID in this field; the characters are case
	sensitive. When the wireless node is operating in Ad-hoc mode, this field operates as
	the Basic Service Set ID (BSSID). All wireless nodes in the same network should use

19