NETGEAR RN10400100NAS, RN31400-100NAS, RN10223D-100NAS manual Deleting a Volume, Adding a Volume

NETGEAR ReadyNAS User Guide

Deleting a Volume

To delete a volume, select the Volume tab of the volume you wish to delete (if there are multiple volumes) and click Delete Volume (in this case only Volume C is configured).

Warning: Make sure that you back up the files you wish to keep before deleting a volume. All shares, files, and snapshots residing on that volume will be deleted are non-recoverable!

Figure 1-25

You are asked to confirm your intention by typing DELETE VOLUME.

Figure 1-26

Adding a Volume

After deleting the volume, Add Volume tab displays listing the available configurable space on the hard disks. All the disks are selected by default. You can elect to specify a hot spare disk if you wish. A hot spare remains in standby mode and automatically regenerates the data from a failed disk from the volume. A hot spare disk is available for RAID level 1 and RAID level 5 only if there are enough disks to fulfill the required minimum plus one.

Configuring Your ReadyNAS 1-23

v1.0, October 2007