NETGEAR RN10400100NAS manual Removing the System Module from the ReadyNAS, Changing User Passwords

NETGEAR ReadyNAS User Guide

Removing the System Module from the ReadyNAS 1100

To access the system module and remove it from the ReadyNAS1100:

1.Power off the unit and remove the screws.

2.Lift up the latch.

3.Pull the system module forward; it slides out easily.

The illustration on the right shows the ReadyNAS1100 with the system module removed.

Figure 3-12

Changing User Passwords

There are two ways in which user passwords can be changed in the User security mode. The first way is for the administrator to change the passwords by selecting Security > User & Group Accounts and then selecting Manage Users from the pull-down menu. The other and preferred way is to allow users to change their own passwords. This relieves the administrator from this task and encourages users to change their passwords on a more regular basis for enhanced security.

Users can use the Web browser and their existing password to log in to https://<ip_addr>/ to access the Web share listing page. Then select the Password tab, and follow the prompts to set a new password

.

Figure 3-13

Maintenance and Administration 3-11

v1.0, October 2007