Manuals / NETGEAR / Computer Equipment / Computer Drive

NETGEAR SC101 manual What does the Reset button on the back panel do?

Models: SC101

1 54
Download 54 pages 17.75 Kb
Page 47
Image 47

Reference Manual for the NETGEAR Storage Central SC101

What does the Reset button on the back panel do?

When pressed once, it reboots the SC101 When pressed and held for more than six seconds, it resets the administrator password to default “password” and detaches all the letter drives. This is handy in case your PC dies and you need gain access to those private/non-shared drives previously-attached on that PC.

I installed two Hitachi hard disks into the SC101, they don’t seem to work, why?

Hitachi hard disks come with “Master” by default as the disk jumper settings, you must change them to “Cable Select” (remember to power off the SC101 before you do that).

You may run into the same problem with disks from other vendors, always make sure you use the “Cable Select” jumper settings with the SC101.

The SC101 shows the message “No Storage Central device was found”.

Check the following things:

•Make sure that the DHCP server is up and running. (If the green LED flashes three times periodically, something is wrong with the DHCP server.)

•The PC and the SC101 must be connected to the same LAN/sub-network (not across different routers, for example)

•The green power LED should be solid

•You must have at least 1 hard disk plugged into the SC101.

•ATA5 or older IDE hard disks are not supported (If you plug in an unsupported disk, the green LED will flash four times periodically)

•If you upgrade the firmware, or click the reset button, or disconnect and reconnect the CAT5 cable to the SC101, the SC101 will reboot, please wait for about two minute for the reboot to complete. If you create many drives, it may take some extra seconds to the reboot the complete.

•You may be running some personal firewall software on your PC. The SC101 works behind Windows XP Personal Firewall, but doesn’t work behind firewalls like Trend Micro Personal Firewall and Norton firewall. Disable the firewall, or configure the firewall to open UDP port 20001.

7-3

v1.0, September 2005

Page 46 Page 48
Page 47
Image 47
NETGEAR SC101 manual What does the Reset button on the back panel do?
Page 46 Page 48

SC101 specifications

The NETGEAR SC101 is a network-attached storage (NAS) device designed to simplify data storage and sharing within a home or small office environment. It provides an efficient solution for users looking to centralize their files, making them accessible from multiple devices connected to the same network.

One of the main features of the SC101 is its user-friendly interface that allows for easy setup and administration. It supports Windows, Mac OS, and Linux operating systems, ensuring compatibility with a wide range of devices. This versatility makes it an attractive choice for households and small businesses that utilize different systems. The SC101 also implements a simple drag-and-drop file management system, enabling users to effortlessly store and retrieve their data.

The device is built with two bays, accommodating standard hard drives that can be customized based on the user's storage needs. This flexibility enables users to start with a single drive and expand their storage capabilities as required. The SC101 supports both RAID 0 and RAID 1 configurations, allowing for a balance between performance and data redundancy. RAID 0 offers enhanced speed, while RAID 1 mirrors data, providing a level of protection against drive failures.

Connectivity is another highlight of the SC101. It features an Ethernet port that connects to the network, with support for various protocols including TCP/IP and UDP. Users can access their files from any computer on the network or even remotely, providing enhanced accessibility for team collaboration or personal use. The built-in web-based management interface also enables users to manage user accounts and permissions, ensuring security and controlled access to data.

In terms of performance, the SC101 utilizes a 480 MHz processor and 64 MB of RAM, which helps in delivering satisfactory performance for file transfers. While it may not compete with modern storage solutions or high-speed drives, it facilitates efficient data retrieval suitable for home and office environments.

Overall, the NETGEAR SC101 is a practical NAS solution that combines central file storage, easy management, and essential data protection features. Its compatibility with various operating systems, support for RAID configurations, and user-friendly setup make it a solid choice for users seeking to enhance their data storage capabilities without the complexity often associated with high-end NAS systems.