Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311
Configure your WG311 and save the
Profile.
a.Open the WG311 Smart Wireless Settings Utility by clicking on the icon in the Windows system tray. The utility opens to the Settings page.
b.Change the Network Name SSID to match your network.
Tip: As an alternative to typing in the SSID, you can use the Network tab to view the available wireless networks.
c.Click the Apply button to activate the connection.
d.Enter a name for your profile and click the Save Profile button to store the current settings.
Tip: If you use your notebook PC to connect to a wireless network at work and at home, create profiles called work and home.
Click here to open the configuration utility.
WG311 system tray icon
WG311 Configuration Utility
Note: The NETGEAR default settings are Infrastructure mode, with ANY for the wireless network name SSID, and WEP disabled.
Note: This procedure assumes you are connecting to a wireless network which is not using WEP security. If your network includes WEP settings, enter the security information in the Security section. For help with these steps, see “Enabling Wireless Security Features” on page
Basic Setup |
