NETGEAR WGT624 V3 manual Router’s Front Panel, LED Descriptions

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3

The Router’s Front Panel

The front panel of the WGT624 v3 wireless router contains the status LEDs described below.

Figure 2-1: WGT624 v3 Front Panel

You can use some of the LEDs to verify connections. Viewed from left to right, Table 2-1describes the LEDs on the front panel of the router. These LEDs are green when lit.

Table 2-1.	LED Descriptions
Label	Activity	Description
	On	Power is supplied to the router.
	Off	Power is not supplied to the router.
Power
	On	The Internet (Wide Area Network) port has detected a link with an
		attached device.
Internet	Blink	Data is being transmitted or received by the Internet port.
	On	Indicates that the Wireless port is initialized.
Wireless
	On (Green)	The Local (LAN) port has detected link with a 100 Mbps device.
	Blink (Green)	Data is being transmitted or received at 100 Mbps.
Local	On (Amber)	The Local port has detected link with a 10 Mbps device.
	Blink (Amber)	Data is being transmitted or received at 10 Mbps.
	Off	No link is detected on this port.
2-6		Introduction

202-10090-02 v 1.4, July 2005