NETGEAR WGT624 V3 manual Configuring the Internet and Wireless Settings

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3

•Security Encryption (WEP) Key: If WEP is enabled, you can manually or automatically program the four data encryption keys. These values must be identical on all PCs and Access Points in your network.

•Automatic Key Generation (Passphrase): Enter a word or group of printable characters in the Passphrase box and click the Generate button to automatically configure the WEP Key(s). If encryption strength is set to 64 bit, then each of the four key boxes will automatically be populated with key values. If encryption strength is set to 128 bit, then only the selected WEP key box will automatically be populated with key values.

•Manual Entry Mode: Select which of the four keys will be used and enter the matching WEP key information for your network in the selected key box.

For 64 bit WEP: Enter ten hexadecimal digits (any combination of 0-9, A-F).

For 128 bit WEP: Enter twenty-six hexadecimal digits (any combination of 0-9, A-F).

–WPA-PSK (Wi-Fi Protected Access Pre-Shared Key): use WPA-PSK standard encryption

•Security Encryption (WPA-PSK): Enter a word or group of printable characters in the Passphrase box. The Passphrase must be 8 to 63 characters in length.

3-12 Configuring the Internet and Wireless Settings

202-10090-02 v 1.4, July 2005