
Connection
CAUTION:
When selecting Ethernet cables
Use flexible,
To prevent damage to the cables, use
cables* that do not protrude from the bottom of the base when the operation board is set to level 1. (For information on adjusting the angle of the operation board, refer to
page 13.)
* Use cables as shown.
Ethernet cable
35 mm or less
When connecting cables
Ensure that the Ethernet cables and the AC adaptor cord are inserted in the grooves, and are clamped to prevent damage to the connectors. Leave some slack in the AC adaptor cord and the Ethernet cable connected to the hub.
When connecting headset jack
Ensure that the headset cord is wound around the hook to prevent damage to the connector.
15