Operation Board Angle Adjustment

The angle of the operation board can be set to one of eight angles (level 1 = 0°, level 8 = 45°).

8 7654

3

2

1

CAUTION:

Hold the operation board until the operation board is secured at the desired angle. Make sure you do not pinch your fingers when raising or lowering the operation board.

To raise:

Gently lift the operation board one level at a time.

To lower:

Raise the operation board to level 8. Next, with one hand on the base of the unit, lift the operation board again to release the latch, then slowly push the operation board down to level 1. If the operation board cannot be lowered to level 1, repeat this step.

When a KX-NT305 is attached to this unit, first lift the unit’s handset cradle to release the

latch (A), then with one hand on the base of the KX-NT305, similarly lift its operation board to release its latch (B).

Locking the Handset Hook

Pull down the handset hook until it locks to prevent the handset from falling off the handset cradle when the unit is mounted to a wall or set at a high angle. To temporarily place the handset down during a conversation, hook it over the top edge of the unit as shown.

13

Page 13
Image 13
Panasonic KX-NT343/KX-NT346/KX-NT366 Operation Board Angle Adjustment, To raise, To lower, Locking the Handset Hook