Panasonic KX-NT343/KX-NT346/KX-NT366 installation instructions Hold Used to place a call on hold

Location of Controls

G AUTO DIAL/STORE: Used for System/Personal Speed Dialling or storing programme changes.

H TRANSFER: Used to transfer a call to another party.

I REDIAL: Used to redial the last dialled number.

J MESSAGE: Used to leave a message waiting indication or call back the party who left the message waiting indication.

K Headset Jack

L FLASH/RECALL: Used to disconnect the current call and make another call without hanging up.

M HOLD: Used to place a call on hold.

NSP-PHONE (Speakerphone): Used for performing hands-free operations.

ONEXT PAGE Key: Used to switch the page for the Self Labelling feature. (KX-NT366 only)

PENTER: Used to assign the selected item.

Q Microphone: Used for hands free conversations.

R Navigator Key: Used to adjust the volume and the display contrast or select desired items.

S CANCEL: Used to cancel the selected item.

T Flexible CO Buttons: Used to seize an outside line or perform a feature that has been assigned to the key.

U LCD Panel: Can be adjusted to the desired angle.

V Soft Buttons (S1-S4): S1-S4 (located from left to right) are used to select the item displayed on the bottom line of the display.

W Message/Ringer Lamp: When you receive an intercom call, the lamp flashes green, and on an outside call, the lamp flashes red. When someone has left you a message, the lamp stays on red.

3