Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3

Note: Be sure to check the NETGEAR web site for documentation updates which are available at http://www.netgear.com/docs.

From the Main Menu of the browser interface, under the Maintenance heading, select the Router Upgrade heading to display the menu shown below.

Figure 5-5: Router Upgrade menu

Note: When uploading software to the WGT624 v3 wireless router, it is important not to interrupt the web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, it may corrupt the software. When the upload is complete, your router will automatically restart. The upgrade process will typically take about one minute.

To check for new firmware:

1.Click Check.If the WGT624 v3 finds new firmware is available, follow the on-screen prompts to download in install the new firmware.

To upload firmware from your hard drive:

1.In the Router Upgrade menu, click the Browse button and browse to the location of the binary (.chk) upgrade file.

2.Click Upload.

Note: In some cases, you may need to reset to factory default and reconfigure the router after upgrading.

5-6

Maintenance

202-10090-02 v 1.4, July 2005

Page 48
Image 48
NETGEAR WGT624 V3 manual Router Upgrade menu