N300 WiFi Range Extender

To restore factory settings:

1.Insert a paper clip into the Factory Reset hole and hold it until the Power LED blinks amber.

Factoy Reset button

2.Release the button.

All the LEDs turn off for about three seconds.

The Power LED lights solid amber for about 30 seconds.

The Power LED lights solid green. The extender returns to its factory settings.

Erase the Extender Settings and Return to Factory Settings

CAUTION:

This process erases any settings that you have configured in the extender.

To erase the extender’s current settings:

1.On your computer, launch a web browser.

2.In the address field of your browser, enter http://www.mywifiext.net.

You are prompted to enter a user name and password. If you do not see the login prompt, make sure to include http:// when you type http://www.mywifiext.net in your browser.

3.Type admin for the user name and type your password.

If you have not yet personalized your password, type password for the password.

Monitor and Maintain the Extender

26

Page 26
Image 26
NETGEAR wn3000rp user manual  To restore factory settings,  To erase the extender’s current settings