NETGEAR wn3000rp Return the Extender to Its Factory Settings

Monitor and Maintain the Extender

25

N300 WiFi Range Extender

3. Type admin for the user name and type your password.

If you have not yet personalized your password, type password for the password.

4. Select Maintenance > Backup Settings.

5. Click the Browse button.

6. Locate and select the previously saved backup file.

By default, the name of the backup file is NETGEAR_WN3000RP.cfg.

CAUTION:

After you click the Restore button, do not try to go online, turn off the

extender, shut down the computer, or do anything else to the extender

until it finishes restarting!

7. Click the Restore button.

A confirmation pop-up screen displays.

8. Confirm your decision.

The extender restarts. This process takes about one minute.

Return the Extender to Its Factory Settings

To reset the extender to factory default settings, you can use either the Factory Reset button

or the Erase feature. For information about the factory settings, see Factory Default Settings

on page 35.

Use the Factory Reset Button to Restore Factory Settings

CAUTION:

This process erases any settings that you have configured in the extender.

Contents

Main Page Contents Chapter 1 Get to Know Your Extender Chapter 2 Install Your Extender Chapter 3 Manage the Extender Network and Settings Chapter 4 Monitor and Maintain the Extender Page Get to Know Your Extender 5 N300 WiFi Range Extender Front Panel The front panel has LEDs. Figure 1. Extender front panel Table 1. LEDs Extender Side and Bottom Panels How the Extender Works Page Page Place the Extender Connect to an Existing WiFi Network Connect with WPS Connect with NETGEAR genie Smart Setup Page Find the Best Location Extender WiFi Performance Cable a Computer or Device to the Ethernet Port Page Log In to the Extender After Initial Setup Change the admin Password Use the Setup Wizard to Connect the Extender to a Network Page Add a WPS Client to the Extender Network View or Change Wireless Settings View or Change Advanced Wireless Settings Set Up a Wireless Access List Page Set Up the Extender to Use a Static IP Address Page Back Up the Extender Configuration Restore Saved Configuration Settings Return the Extender to Its Factory Settings Use the Factory Reset Button to Restore Factory Settings Erase the Extender Settings and Return to Factory Settings Upgrade the Firmware View Wired and Wireless Network Devices Page Page FAQs Cannot Log In to the Extender Cannot Join the Extender WiFi Network Page Page Supplemental Information 35 N300 WiFi Range Extender Factory Default Settings Table 4. Factory Settings Technical Specifications The following table includes the product specifications. Table 5. Technical specifications Table 5. Technical specifications (continued)