Extender Side and Bottom Panels | NETGEAR wn3000rp instruction

N300 WiFi Range Extender

Extender Side and Bottom Panels

The side panel has buttons, and the bottom panel has the Factory Reset button and an Ethernet port.

Power On/Off button

WPS button

Factory Reset button

Ethernet port

Figure 2. Extender side and bottom panels

How the Extender Works

The extender increases the distance of a WiFi network. The extender connects to your network’s WiFi signal and it broadcasts its own WiFi signal. When you are too far away to connect to your network’s WiFi signal, you can connect to an extender WiFi signal instead.

WiFi Range

Extender

Boosts the range of your existing WiFi and creates a stronger signal in hard-to-reach areas.

Existing WiFi

Sometimes your router does not provide the WiFi coverage you need.

Figure 3. The extender WiFi signals reach areas outside of the range of your router

Get to Know Your Extender

6

Image 6

NETGEAR wn3000rp user manual Extender Side and Bottom Panels, How the Extender Works

Contents

N300 WiFi Range Extender Support ComplianceTrademarks Contents Get to Know Your Extender Front Panel Front panel has LEDs Extender Side and Bottom Panels How the Extender Works When to Use Your Extender Install Your Extender  To place the extender Connect to an Existing WiFi NetworkPlace the Extender  To connect with WPS Connect with Netgear genie Smart Setup  To connect with the browser-based Smart Setup Install Your Extender Extender WiFi Performance Find the Best Location Cable a Computer or Device to the Ethernet Port  To cable a computer to the extender Ethernet port To cable a device to the extender Ethernet port Settings  To log in to the extender after the initial setup Log In to the Extender After Initial SetupChange the admin Password  To change the password for the extender Use the Setup Wizard to Connect the Extender to a Network Select Maintenance Set PasswordSelect Setup Wizard Manage the Extender Network and Settings Add a WPS Client to the Extender Network View or Change Wireless Settings To view or change the wireless settings  To add a WPS client View or Change Advanced Wireless Settings Select Setup Wireless Settings To view or change the advanced wireless settings Set Up a Wireless Access List Select Advanced Wireless Settings  To set up and enable the access list Set Up the Extender to Use a Static IP Address Select Setup IP Address Setup To specify a static IP address Monitor and Maintain the Extender  To back up the extender configuration settings Back Up the Extender ConfigurationRestore Saved Configuration Settings Select Maintenance Backup Settings Return the Extender to Its Factory Settings Use the Factory Reset Button to Restore Factory Settings  To restore factory settings  To erase the extender’s current settings Upgrade the Firmware View Wired and Wireless Network Devices Select Maintenance Firmware Upgrade To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting FAQs User name. admin Cannot Join the Extender WiFi Network Cannot Log In to the Extender To get the translated MAC address FAQs and Troubleshooting Supplemental Information Factory Default Settings Technical Specifications N300 WiFi Range Extender Technical specifications