N600 Wireless Dual Band Router WNDR3400 Setup Manual
To access the Internet from any computer connected to your wireless router, launch a browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the wireless router’s Internet LED blink, indicating communication to the ISP.
Using Push 'N' Connect (WPS) to Configure Your Wireless Network
If your wireless clients support
and easily to the router. Look for the symbol on your client device.1 WPS automatically configures the SSID and wireless security settings for the router (if the router is in its default state) and broadcasts these settings to the wireless client.
NETGEAR’s Push 'N' Connect feature is based on the
If the router has already been configured manually, and either
If you choose to use WPS, the only security methods supported are
The following instructions assume that you are configuring WPS on the router for the first time and connecting a
To connect a device using WPS:
1.Open the networking utility of the device you want to connect to that supports WPS.
2.Push the wireless router’s dome for 5 seconds, then release. The dome lights will start to blink.
1. For a list of other
Configuring Your Wireless Network | 26 |