N600 Wireless Dual Band Gigabit Router Premium Edition WNDR3800

Prepare the Router for Installation

1.Carefully remove the protective film from the top of your router.

2.Set up your router by aligning the

arrow on the base with the arrow on

Restore

the back of the case, and sliding the

Factory

router onto the base.

Settings

Figure 2. Align arrow on base with

button

arrow on case back

 

3.Place your router in an area suitable for installation (near an AC power outlet and accessible to the Ethernet cables for your wired computers). See Position Your Wireless Router on page 14 for more information.

Hardware Features

Before you cable your router, take a moment to become familiar with the label and the front and back panels. Pay particular attention to the LEDs on the front panel.

Front Panel

The router front panel has the LEDs and icons shown in the figure. Note that the Wireless and WPS icons are buttons.

Power 2.4 GHz 5 GHz USB Internet Ethernet (LAN) Wireless On/Off WPS

Figure 3. Front panel LED and button icons

Hardware Setup

11

Page 11
Image 11
NETGEAR WNDR3800 user manual Prepare the Router for Installation, Hardware Features, Front Panel