Installing Your Router Manually (Advanced, Mac, and Linux Users) 17
6. Locate the Ethernet cable (D) that is attached to your computer (see Step 3). Securely insert
that cable into a LAN port on the router, such as LAN port 1 (E), as shown in Figure9.
7. Connect any additional wired PCs to your router by inserting an Ethernet cable from a PC into
one of the three remaining LAN ports.
When your network cables are connected as shown in Figure 9, you are ready to start your
network. Start your network in the correct sequence, as described below.
Figure 8
Figure 9
Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
C
D
E