Table 1. Home Router Default Configuration Settings (continued)
Feature | Default Setting | |
|
|
|
| Time Zone Adjusted for Daylight Saving | Disabled |
| Time |
|
|
|
|
Firewall |
| |
|
|
|
| Inbound (communications coming in from | Disabled (bars all unsolicited requests except for |
| the Internet) | traffic on port 80, the http port) |
|
|
|
| Outbound (communications going out to | Enabled (all) |
| the Internet) |
|
|
|
|
Wireless |
| |
|
|
|
| Wireless Communication | Enabled |
|
|
|
| SSID Name | NETGEAR |
|
|
|
| Security | Disabled |
|
|
|
| Broadcast SSID | Enabled |
|
|
|
| Transmission Speed | Autoa |
|
|
|
| Country/Region | United States (North America only; otherwise varies |
|
| by country and region) |
|
|
|
| RF Channel | 6 until region selected |
|
|
|
| Operating Mode | 130 Mbps |
|
|
|
| Data Rate | Best |
|
|
|
| Output Power | Full |
|
|
|
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and net- work overhead lower actual data throughput rate.
Restoring the Default User Name and Password
You can restore the factory default configuration settings that reset the router’s User Name to admin, the Password to password, and the IP address to 192.168.1.1. This procedure erases your current configuration and restores the factory defaults.
To restore the factory default configuration settings:
1.Use a sharp object such as a pen or a paper clip to press and hold the default reset button, located on the rear panel of the router, for about 20 seconds (see “Back Panel” on page 3).
2.Release the reset button and wait for the router to reboot.
36 | Default Configuration |
