Netopia 3387W-ENT

Easy Setup 6-1

CChh

hhaa

aapp

pptt

ttee

eerr

rr 66

EEaa

aass

ss yy

yy SS

SSee

eett

ttuu

uupp

This chapter describes how to use the Easy Setup Telnet screens on your Netopia 3387W-ENT. After completing

the Easy Setup Telnet screens, your router will be ready to connect to the Internet or another remote site.

Easy Setup Telnet Screens

Using four Easy Setup Telnet screens, you can:

•Modify a connection proﬁle for your router for the connection to your ISP or remote location

•Set up IP addresses and IP address serving

•Password–protect conﬁguration access to your Netopia 3387W-ENT

Accessing the Easy Setup Telnet screens

To access the Telnet screens, Telnet to the Netopia Router over your Ethernet network. See “Connecting

through a Telnet Session” on page 5-2.

Note: Before continuing, make sure you have the information that your ISP or network administrator has given

you for conﬁguring the Netopia Router.

The Netopia Router’s ﬁrst Telnet screen, Main Menu, appears in the terminal window of the attached PC or

Macintosh computer when:

•The Netopia Router is turned on

•The computer is connected to the Netopia Router

•Telnet software is running and conﬁgured correctly