Network Technologies ST-2U operation manual Units with audio support optional, RearViewof

NTI NODEMUX SERIES UNIVERSAL KVM SWITCH

WARNING! If a serial mouse port is being used on a PC to connect a serial CPU to an ST-2U switch, do not use a generic 9D-to-6mD adapter to make connection to the PS/2 cable-- use a VOPEX-IM9D to convert the signal from the serial port to PS/2. (See Fig. 10)

9D Male

Do not use with NTI products

6 Pin miniDIN Male

Generic

9D-to 6mD adapter

9DMale

6PinminiDIN Male

VOPEX-IM9D

Figure 10- Use a NTI VOPEX-IM9D with serial type mouse port

Units with audio support (optional)

Connect the 3.5mm plug from speakers to the 3.5mm jack labeled "AUD OUT". Attach SA-xx-MM audio cables (purchased separately) between the audio port on each CPU and the 3.5mm audio jacks marked "AUD 1" on the NODEMUX switch. Be sure to connect the audio cables from each CPU to audio jacks of the same number as the keyboard, mouse, and video cable ports connected to. (See Fig. 11).

3.5mmStereo	RearViewofST-2U-A
Jack
	AUD2	AUD1 AUDOUT
	VIDEO2 VIDEO1	MONITOR
		CPU2 CPU1 USER
		PWR
RearViewof		3.5mmStereo
PS/2CPU
		Plug	Speakers

AudioPort

line
out	3.5mmStereo	3.5mmStereo
ONEWILLBEMARKED"line	Plug	Plug
out","spkr","headphones"
ORWITHTHISSYMBOL

SA-xx-MM

Figure 11- Connect audio signal and speakers to a ST-2U-A

7