Network Technologies ST-2U operation manual Table of Figures

TABLE OF CONTENTS
Introduction	1
Materials	1
Features and Functions	2
Installation	3
Units with audio support (optional)	7
Units with touch screen support (optional)	8
Power Up/Down	9
Using the NTI ST-2U 2-Port Universal KVM Switch	9
Front Panel Control	9
Keyboard Control	9
Command Mode	9
Scan Mode	10
Broadcast Mode	10
Normal Mode	10
USB CPU Support	11
Introduction	11
General Notes	11
Keyboard translation	11
Cables	11
LED Operation	11
RS232 Control	12
RS232 Connections and Configuration	12
Remote Connection	12
Baud Rate	12
Unit Address	12
Dipswitches	13
RS232 Interface Test Program	13
Touch Screen Support	14
Audio Support	15
Dual Video Support	15
Keyboard-To-CPU Translation	16
Troubleshooting	17
TABLE OF FIGURES
Figure 1- Keyboard dip-switch configuration	3
Figure 2- Connect VGA multi-scan monitor to ST-2U	3
Figure 3- Connect SUN monitor to ST-2U-13W3	4
Figure 4- Connect PS/2 keyboard and mouse to ST-2U	4
Figure 5- Connect a MAC keyboard/mouse to ST-2U	4
Figure 6- Connect SUN keyboard/mouse to ST-2U	5
Figure 7- Connect PS/2 CPU to ST-2U	5
Figure 8- Connect MAC CPU to ST-2U	6
Figure 9- Connect SUN CPU to ST-2U	6
Figure 10- Use a NTI VOPEX-IM9D with serial type mouse port	7
Figure 11- Connect audio signal and speakers to a ST-2U-A	7
Figure 12- Connect a touch-screen monitor to ST-2U-TS	8
Figure 13- Connect serial device cable from CPU to ST-2U-TS	8
Figure 14- USB device ports on the ST-2U-U	11
Figure 15- Addressing a daisy-chain of NTI switches	12
Figure 16- Pinout for the Matrix-Y-1 cable	12
Figure 17- RS232 Dipswitches	13
Figure 18- Three types of ports on the ST-2U-TS	14
Figure 19- Control CPU audio with ST-2U-A	15
Figure 20- Connections for video cables on the ST-2U-DV	15
Figure 21- Keyboard types	16

MAN042 Rev Date 4/15/2004