New Media Technology 9212 Hardware & Software installation, 9201Pro Hardware connection recommend

IP POWER 9212 USER MANUAL

4. Hardware & Software installation

Before you star to use IP Power 9212, please follow the steps below:

Check the package to make sure the contents is complete.

Prepare one Ethernet HUB, or Router

Check the voltage of the power supply to make sure it is AC 110-240 volt

Hardware Installation : Connect RJ45 first then POWER jack

1Connect the 9200 to HUB through RJ 45 netting cable.

2Connect the 9200 (IN) to 9201 & 9200 ( OUT ) to 9202 through D-SUB cable. Please connect 9200 D-SUB IN to 9200 IN port

&9200 D-SUB OUT to 9202 OUT port

3Connect the HUB to the Internet (May through ADSL/XDSL modem).

4Connect the power adapter to the 9200.

Power on your computer and power adapter of IP POWER 9212.

9201Pro Hardware connection (recommend):

For different request of normal state of electric equipment, 9201 offers four sets of voltage signal IN1-IN4 and four sets of shortcut circuit signals IN5-IN8.

9201 Pro provide 4set Source mode - Voltage Input – Out 1 ~ Out 4 ON : 4V~24V

OFF : 0V ~ 3V

4 set Sink mode - Resistance input – Out 5 ~ Out 8. ON : 200 ohm~ 0 ohm

OFF : 500 ohm ~ ∞

1. The polarity: Right - Positive & Left – Negative .

- 7 - VER. X.X,