New Media Technology 9212 manual Setting Sample Receiver 12345678@abcd.com 87654321@dcba.com

Setting Sample :

Receiver: 12345678@abcd.com 87654321@dcba.com

Sender: abcd@168.com

Mail Server: 168.com

Mail Password: ●●●●●●

Warning MSG: Alert

After type in all the information please click “apply” first to save the change and then “send ” to send mail.

There is status bar next to at the clock : There are four possible situation for sending e-mail.

a.Mail send OK : Receiver should receive mail in short time.

b.User or password error : After change the username and password please click “apply “

To save setting and click send to

c . Mail ahead sending , please send later : Mail server was block as lots mail

d. Connect time out , mail to be dropped : please login again

1 )Receiver : can be 2 receiver e-mail address ，please use space between two e-mail address. After setup, ever time you login , IP Power 9212 will send receiver the IP address.

2)Mail Server : must be a mail server which can supply e-mail transfer and support SMTP function .

3)Warning MSG: the title of the e-mail. 4)The maximum digits of each item:

- 20 -