AUTOPILOT
4.2.7 Setup mode
To access setup mode, press and hold MODE more than 2
seconds. [Lit OFF] flashes. To move to next setup group, press
MODE again. > 2sec
To return to standby mode, press SET when the text return [RET] is
displayed.
4.2.8 Lighting
The instrument uses red back lighting for the display and the 4
push-buttons. The light can be set at 4 different levels.
To access the light control, press and hold MODE for more than 2
seconds. The flashing text [Lit OFF] will be displayed and the
display will be lit momentarily.
To select between the 4 light levels [LOW], [MID], [MAX] and
[OFF], press RIGHT. To lock the selected level, press SET.
The selected light level will be copied to all Nexus instruments
connected to the Network. It is not possible to reduce or turn off the
lighting on an individual instrument.
18