Night Owl Optics BJPRO-86-1TB manual Camera Installation, 8.1Connecting Cameras to the DVR

Chapter 8: Camera Installation

8.1Connecting Cameras to the DVR

1.Your DVR system comes with one 60-ft. coaxial cable per camera. Connect each cable to a camera using the BNC connectors (yellow connector) and the DC connectors (red connector).

2.Plug the other end of the cables into the Video Input ports on the back panel of the DVR.

3.Connect the provided four-way power splitter cable into the DC connectors of the cables.

4.Plug the power splitter into the camera power supply.

5.Plug the camera power supply into an available wall outlet or uninterruptable power supply.

Make sure all cameras are working (prior to mounting them) by connecting them as described in the section above. Once all cameras are confirmed to be fully operational, you can run the cables and mount the cameras at their final locations.

19