If you ran 800 meters, adjust displayed distance to read 800m.
Manually Calibrate the SDM Pod
After calibration, the SDM pod automatically calculates an offset value. The default value is 1000.
Change the offset value to make small adjustments to the calibration. If the SDM pod is slightly under measuring a known distance, increase the offset value. Different shoe models may affect the pod calibration. Adjust the offset value accordingly if you notice differences between shoes.
Follow steps 
through 
to
4 Press to change value.
5 EXIT
| EXAMPLES | ||
| 1000 | = | factory setting |
2 3 SEC | 990 | = | 99% of factory setting |
1010 | = | 101% of factory setting | |
7
8EXIT
3 | Press several |
Scroll to | times to scroll |
WKOUT or | to OFFSET. |
CHRON mode. |
|
The offset value is 1000. You run 400m. The SDM pod returns a reading of 380m (5% under) The offset value should be adjusted to 1050 (5% above).
NOTE: Write down and save your offset value. It will come in handy if you let friends or family borrow the Triax Elite system and they change the calibration setting.
17
