Using Macro Mode
Use macro mode when taking
1Press the multi selector I(p).
2 Select ON and press the kbutton. | Macro mode |
•If a setting is not applied by pressing the kbutton within a few seconds, the selection will be canceled.
3 Move the zoom control to set the zoom ratio to a position where Fand the zoom indicator glow green.
•When the zoom ratio is set to a position where Fand the zoom indicator glow green, the camera can focus on subjects as close as approximately 5 cm (2 in.) from the lens.
•When the zoom position is in the area indicated by 1, the
camera can focus on subjects as close as approximately 1 cm (0.4 in.) from the lens.
1
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
C The Macro Mode Setting
Features Shooting
•The setting may not be available with some shooting modes.
•The setting applied in A(auto) mode is saved in the camera’s memory even after the camera is
turned off. | 49 |
|