❚❚The Optional FT1 Mount Adapter
Read this section for information on using the optional FT1 mount adapter. Before proceeding, be sure that you have read and understood this manual and the documentation for the FT1 and lenses.
Autofocus
Autofocus is available only with AF-S lenses; other lenses support manual focus only. Set the camera focus mode to AF-S(the camera will not focus in other autofocus modes). The only AF- area mode available is Single-pointand the camera focuses on the subject in the center focus point only. Face-priority AF is not supported. In some cases, a beep may sound, the in-focus indicator may be displayed, and pictures can be taken when the camera is not in focus; if this occurs, focus manually.
Manual Focus
Follow the steps below to focus manually when using the FT1 with a NIKKOR F mount lens.
1 Select manual focus mode.
Select Focus mode in the shooting menu, highlight Manual focus, and press J. Press the shutter-release button halfway to exit the menus when settings are complete.
If the lens supports autofocus with manual override, after focusing using autofocus you can keep the shutter-release button pressed halfway and rotate the lens focus ring to fine- tune focus manually. To refocus using autofocus, press the shutter-release button halfway again.
n