Features Shooting

s Night portrait

Press the dbutton to select YHand-heldor ZTripod in Night portrait.

One image is captured at a slow shutter speed. Compared to using ZTripod, when YHand-heldis selected, the camera sets a slightly faster shutter speed in accordance with the shooting conditions to prevent camera shake.

Vibration reduction is disabled regardless of the Vibration reduction (A91) setting in the setup menu.

The flash always fires. Raise the flash before shooting.

cLandscape

Press the dbutton to select Noise reduction burst or Single shot in Landscape.

Noise reduction burst: This enables you to shoot a sharp landscape with a minimum of noise.

-Press the shutter-release button all the way to capture a series of images which are combined into a single image and saved.

-Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed. After taking an image, do not turn the camera off before the monitor switches to the shooting screen.

-The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen in the monitor at the time of shooting.

Single shot (default setting): Saves images with emphasized outlines and contrast.

-One image is captured when the shutter-release button is pressed all the way.

38