Problem

 

Cause/Solution

A

 

 

 

• The camera automatically turns off to save power

23

 

 

 

•

(auto off function).

 

 

 

Camera turns off

The camera or battery has become too cold and

F3

 

without

•

cannot operate properly.

 

 

 

warning.

The inside of the camera has become hot. Leave the

–

 

 

 

camera off until the inside of the camera has cooled,

 

 

 

 

 

and then try turning it on again.

 

 

 

 

 

 

 

 

 

• The camera is off.

22

 

 

 

• The battery is exhausted.

22

 

 

 

• The camera has entered standby mode to save

23

 

 

 

 

power. Press the power switch, shutter-release

 

 

 

 

 

button, cbutton or b(emovie-record) button,

 

 

 

The monitor or

•

or rotate the mode dial.

 

 

 

You cannot turn on both the monitor and viewfinder

–

 

viewfinder is

 

 

at the same time. It may take a while to switch

 

 

 

blank.

 

 

 

 

 

between the monitor and viewfinder.

 

 

 

 

 

 

 

 

 

• The camera and computer are connected via a USB

93,

 

 

 

 

cable.

96

 

 

 

• The camera and TV are connected via an audio video

93,

 

 

 

 

cable or HDMI cable.

E13

 

 

• Interval timer shooting in progress.

E35

 

 

 

 

 

 

 

• The ambient light is too bright. Move to a darker

7

 

Technical

Monitor is hard

•

place or use the viewfinder.

91,

 

 

 

Adjust the monitor brightness.

 

 

to see.

 

 

 

 

E62

 

 

 

 

 

 

• The monitor is dirty. Clean the monitor.

F6

Notes

 

 

 

 

 

Image in the

Adjust the viewfinder using the diopter adjustment

 

 

viewfinder is

7

 

control.

 

and

difficult to see.

 

 

 

 

 

 

 

 

 

 

Index

 

• If the camera clock has not been set, the “Date not

24, 91,

 

 

 

set” indicator flashes during shooting and movie

E60

 

 

recording. Images and movies saved before the clock

 

 

 

 

 

 

 

 

 

 

is set are dated “00/00/0000 00:00” or “01/01/2014

 

 

 

Date and time of

 

00:00” respectively. Set the correct time and date

 

 

 

recording are

 

from the Time zone and date option in the setup

 

 

 

not correct.

 

menu.

 

 

 

 

• The camera clock is not as accurate as ordinary

91,

 

 

 

 

watches or clocks. Periodically compare the time of

E60

 

 

 

the camera clock with that of a more accurate

 

 

 

 

 

timepiece and reset as required.

 

 

 

 

 

 

 

 

 

No information

Hide info is selected for Photo info in Monitor

91,

 

 

displayed in

 

 

settings in the setup menu.

E62

 

monitor.

 

 

 

 

 

 

 

 

 

 

 

 

F9