Features Shooting

yMfParty/indoor

•To avoid the effects of camera shake, hold the camera steady. Set Vibration reduction (A91) to Off in the setup menu when using a tripod to stabilize the camera during shooting.

yMkClose-up

From the screen displayed after kClose-up is selected, select Noise reduction burst or Single shot.

•Noise reduction burst: This enables you to shoot a sharp image with a minimum of noise.

-Press the shutter-release button all the way to capture a series of images which are combined into a single image and saved.

-Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed. After taking an image, do not turn the camera off before the monitor switches to the shooting screen.

-If the subject moves or there is a significant camera shake during continuous shooting, the image may be distorted, overlapped, or blurred.

-The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen in the monitor at the time of shooting.

•Single shot (default setting): Saves images with emphasized outlines and contrast.

-One image is captured when the shutter-release button is pressed all the way.

•The focus mode (A61) setting is changed to D(macro close-up) and the camera automatically zooms to the closest position at which it can focus.

•You can move the focus area. Press the kbutton, use the multi selector HIJKor rotate it to move the focus area, and press the kbutton to apply the setting.

40