1/250 F5.6
1/250 F5.6
840
25m 0s
25m 0s
840
840
1/250 F5.6
25m 0s

Features Shooting

j (Programmed auto)

Use for automatic control of the exposure by the

camera.

• Different combinations of shutter speed and aperture value can be selected without changing the exposure by rotating the command dial (“flexible program”). While flexible program is in effect, a flexible program

mark (A) is displayed next to the mode indicator (j) in the upper left of the monitor.

•To cancel flexible program, rotate the command dial until the flexible program mark (A) is no longer displayed. Selecting another shooting mode, or turning off the camera, also cancels flexible program.

k (Shutter-priority auto)

Use to shoot fast-moving subjects at a fast shutter speed, or use to emphasize the movements of a moving subject at a slow shutter speed.

• The shutter speed can be adjusted by rotating the command dial.

l (Aperture-priority auto)

Use to bring subjects including both the foreground and background into focus or blur the subject’s background intentionally.

• The aperture value can be adjusted by rotating the multi selector.

m (Manual)

Use to control the exposure according to shooting requirements.

• When adjusting the aperture value or shutter

speed, the degree of deviation from the

 

 

 

 

 

 

 

 

exposure value measured by the camera is

 

25m 0s

 

displayed in the exposure indicator of the

1/250 F5.6

 

 

840

 

monitor. The degree of deviation in the

 

 

 

 

Exposure indicator

exposure indicator is displayed in EVs (–2 to +2

 

 

 

 

EV in increments of 1/3 EV).

 

 

 

 

•The shutter speed can be adjusted by rotating the command dial and the aperture value can be adjusted by rotating the multi selector.

50