Quantum Audio quick start Choosing a Location, Unpacking the PX502 Tape Library

PX502 Tape Library Quick Start Guide

Choosing a Location

When choosing an installation site for the PX502, consider the following requirements:

•Rack Space Requirements

•Environmental Conditions

Rack Space Requirements

Table 1 contains the rack requirements for the PX502 tape library.

Providing Necessary Tools

Provide the following tools for unpacking and installing the PX502 tape library:

•#1 PHILLIPS® screwdriver

•#2 PHILLIPS screwdriver

•#1 flat blade screwdriver

•Allen wrench (2.5mm and 3mm) included in accessory kit

•Antistatic wrist strap included in accessory kit

Taking ESD Precautions

Table 1 Rack Requirements

Dimensions	PX502
Depth	31 in (78.7 cm)
Width	19 in (48.3 cm)
Height	6.75 in (17 cm), 4U
Weight	52 lbs (23.6 kg)
Air Clearance	Open 4 in (10 cm) behind unit
	for proper air flow

Environmental Conditions

The installation site must have the following environmental conditions:

•Humidity: 20%-80% non-condensing

Some components within the PX502 tape library contain static-sensitive parts. To avoid damaging these parts while performing installation procedures, always observe the following precautions:

•Keep the PX502 turned off during all installation procedures.

•Use an antistatic wrist strap (included in the accessory kit).

•Keep static-sensitive parts in their original shipping containers until ready for installation. Look for the ESD sticker to identify static sensitive parts.

•Avoid touching connectors and other components.

•Temperature: 10°C-35°C (50°F-95°F)

•Altitude: -500 to 10,000 feet (-152 to 3048 meters)

These environmental conditions apply when the PX502 tape library is in operation.

NOTE: Dry climates and cold-weather heating environments have lower relative humidity and are more likely to produce static electricity.

NOTE: For additional specifications, refer to the Quantum PX500 Series User’s Guide (PN 81- 81290)

Unpacking the PX502 Tape Library

This section explains how to unpack the PX502 tape library and move it to its final installation location.

Preparing for the Installation

Before you begin the installation procedure in this section, make the following preparations as described in this section:

•Providing Necessary Tools

•Taking ESD Precautions

NOTE: Inspect the outer library packaging for damage. If

there is any damage evident on the library packaging, do not continue with the installation and contact Quantum customer support.

2