Cleaning and Storage
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints or other stains
Lens that cannot be removed with a blower, wipe the lens with a soft, dry cloth or an eyeglass cleaning cloth, using a spiral motion that starts at the center of them and working toward the edges. If this fails, clean the lens using a cloth lightly dampened with commercial lens cleaner.
Monitor
Remove dust or lint with a blower. To remove fingerprints and other stains, clean the monitor with a soft, dry cloth, being careful not to apply pressure.
Use a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry cloth. After using the camera underwater or at the beach, gently wipe off any sand or salt with a soft cloth lightly dampened with fresh water and dry thoroughly.
Index and Notes Technical
Body • If you handle the camera using hands where sunscreen lotion is applied, this could cause deterioration of the camera exterior.
Note that foreign matter inside the camera could cause damage not covered by the warranty.
C More Information
See ”Notes About Waterproof and Dustproof Performances” (Axvi) and ”Cleaning After Using the Camera Underwater” (Axviii) for more information.
F8