Notes About Operating Temperature and Humidity and Condensation
The operation of this camera has been tested at temperatures
•The performance of the batteries (number of pictures shot and shooting time) will drop temporarily.
•If the camera is in a very cold state, the performance may drop temporarily, for example, the monitor may be darker than normal immediately after the camera is turned on or residual images may be produced.
•When snow or water droplets adhere to the exterior of the camera, immediately wipe them off.
-If the buttons or switches are frozen, they may not operate smoothly.
-If the microphone or speaker openings are clogged with water droplets, the sound may deteriorate or become distorted.
bOperating environmental conditions such as temperature and humidity may cause fogging (condensation) on the inside of the monitor, lens, or flash window.
This is not a camera malfunction or defect.
bEnvironmental conditions that are likely to cause condensation inside of the camera
Fogging (condensation) may occur on the inside of the monitor, lens, or flash window in the following environmental conditions where there are sharp temperature changes or high humidity.
•The camera is suddenly immersed in low temperature underwater from high temperature on land.
•The camera is moved from a cold place to a warm place, such as inside a building.
•The
Introduction
bClearing the fogging
•Open the
To clear the fogging, remove the battery and memory card, and leave the camera with the
•If the fogging does not clear, consult your retailer or