OShoot at intervals

•The camera can automatically capture still images at pre-determined intervals. Images captured in one shooting are saved in one folder and can be viewed in a slide show (A58).

•Press flexible button 2 (dShoot every 30 seconds), flexible button 3 (eShoot once a minute), or flexible button 4 (fShoot every 5 minutes) to set the shooting interval.

•The maximum number of images that can be captured depends on the selected interval.

-Shoot every 30 seconds: Approx. 280 images

-Shoot once a minute: Approx. 140 images

-Shoot every 5 minutes: Approx. 30 images

•Use a sufficiently charged battery to prevent the camera from turning off during shooting.

•Press the shutter-release button all the way down to capture the first image. In between each shot, the monitor turns off and the power-on lamp flashes. The monitor automatically turns on again just before the next image is captured.

•Press the shutter-release button halfway to stop shooting.

•The flash is set to wAuto flash, but the setting can be changed (A31).

•The self-timer is not available (A33).

JShoot under water

•When Shoot under water is set, the waterproofing-related messages are displayed. Confirm each message and press the multi selector Kto display the next message. Press flexible button 4 (O) to skip the messages and change to the shooting screen.

•See “<Important> Shockproof, Waterproof, Dustproof, Condensation” (Axv-xxi) for more information about using the camera underwater.

•The flash is set to yFlash off, but the setting can be changed (A31).

•The self-timer can be set, but YSmile timer is not available (A33, 35).

Features Shooting

39