QConnections

Connecting to a Computer

This section describes how to use the supplied USB cable to connect the camera to a computer.

Before Connecting the Camera

Before connecting the camera, install the software on the supplied ViewNX 2 CD. To ensure that data transfer is not interrupted, be sure the camera EN-EL15 battery is fully charged. If in doubt, charge the battery before use or use an EH-5b AC adapter and EP-5B power connector (available separately).

❚❚Supplied Software

ViewNX 2 includes a “Nikon Transfer 2” function for copying pictures from the camera to the computer, where ViewNX 2 can be used to view and print selected images or to edit photographs and movies. For more information, see ViewNX 2 online help.

❚❚Supported Operating Systems

The supplied software can be used with computers running the following operating systems:

Windows: Pre-installed versions of Windows 8, Windows 7, Windows Vista, and Windows XP; not compatible with 64-bit editions of Windows XP.

Macintosh: OS X 10.8 or 10.7, Mac OS X 10.6

See the websites listed on page xxiii for the latest information on supported operating systems.

A Connecting Cables

 

 

Be sure the camera is off when connecting or disconnecting interface cables. Do not use

 

 

force or attempt to insert the connectors at an angle. Close the camera connector cover

 

 

when the connector is not in use.

 

 

Q

D During Transfer

 

 

 

Do not turn the camera off or disconnect the USB cable while transfer is in progress.

 

 

A Windows

 

 

To visit the Nikon website after installing ViewNX 2, select All Programs > Link to Nikon

 

 

from the Windows start menu (Internet connection required).

 

 

 

 

 

193