Flash Compensation

Flash compensation is used to alter flash output by from –3EV to +1EV in increments of 1/3 EV, changing the brightness of the main subject relative to the background. Flash output can be increased to make the main subject appear brighter, or reduced to prevent unwanted highlights or reflections.

Press the Ybutton and rotate the sub-command dial until the desired value is displayed in the control panel. In general, choose positive values to make the main subject brighter, negative values to make it darker.

Mbutton Sub-command dial

At values other than ±0, a Yicon will be displayed in the control panel and viewfinder after you release the Ybutton. The current value for flash compensation can be confirmed by pressing the Y

l button.

Normal flash output can be restored by setting flash compensation to ±0.0. Flash compensation is not reset when the camera is turned off.

±0 EV (Ybutton

pressed)

–0.3 EV

+1.0 EV

190