Option

Description

 

At the default setting of Sub-command dial, aperture can

 

only be adjusted with the sub-command dial (or with the

 

main command dial if On is selected for Change main/sub).

 

If Aperture ring is selected, aperture can only be adjusted

Aperture

with the lens aperture ring and the camera aperture display

setting

will show aperture in increments of 1 EV (aperture for type G

 

lenses is still set using the sub-command dial). Live view is

 

not available when Aperture ring is selected and a CPU lens

 

with an aperture ring is attached. Note that regardless of the

 

setting chosen, the aperture ring must be used to adjust

 

aperture when a non-CPU lens is attached.

 

 

 

At the default setting of Off, the multi selector is used to

 

choose the picture displayed during full-frame playback,

 

highlight thumbnails, and navigate menus. If On is selected,

 

the main command dial can be used to choose the picture

 

displayed during full-frame playback, move the cursor left or

Menus

right during thumbnail playback, and move the menu

highlight bar up or down. The sub-command dial is used to

and

display additional photo information in full-frame playback

playback

 

and to move the cursor up or down during thumbnail

 

playback. While menus are displayed, rotating the sub-

 

command dial right displays the sub-menu for the selected

 

option, while rotating it left displays the previous menu. To

 

make a selection, press 2, the center of the multi selector, or

 

J.

 

 

U

327