12Requires PK-12 or PK-13 auto extension ring. PB-6D may be required depending on camera orientation.

13Use preset aperture. In aperture-priority auto exposure mode, set aperture using focusing attachment before determining exposure and taking photograph.

•PF-4 Reprocopy Outfit requires PA-4 Camera Holder.

ACompatible Non-CPU Lenses

If lens data are specified using Non-CPU lens data (pg. 210), many of the features available with CPU lenses can also be used with non-CPU lenses. If lens data are not specified, color matrix metering can not be used, and center-weighted metering is used when matrix metering is selected.

Non-CPU lenses can only be used in exposure modes gand h, when

aperture must be set using the lens aperture ring. If the maximum aperture has not been specified using Non-CPU lens data, the camera

aperture display will show the number of stops from maximum aperture; the actual aperture value must be read off the lens aperture ring. Aperture-priority auto will be selected automatically in exposure modes e and f. The exposure-mode indicator (eor f) in the control panel will blink, and gwill be displayed in the viewfinder.

DIncompatible Accessories and Non-CPU Lenses

The following accessories and non-CPU lenses can NOT be used with the D700:

•TC-16AS AF teleconverter

•Non-AI lenses

•Lenses that require the AU-1 focusing unit (400mm f/4.5, 600mm f/5.6, 800mm f/8, 1200mm f/11)

•Fisheye (6mm f/5.6, 7.5mm f/5.6, 8mm f/8, OP 10mm f/5.6)

•2.1cm f/4

•Extension Ring K2

•180–600mm f/8 ED (serial numbers 174041–174180)

•360–1200mm f/11 ED (serial numbers 174031–174127)

•200–600mm f/9.5 (serial numbers 280001–300490)

•AF lenses for the F3AF (AF 80mm f/2.8, AF 200mm f/3.5 ED,

AF Teleconverter TC-16)

•PC 28mm f/4 (serial number 180900 or earlier)

•PC 35mm f/2.8 (serial numbers 851001–906200)

•PC 35mm f/3.5 (old type)

•Reflex 1000mm f/6.3 (old type)

•Reflex 1000mm f/11 (serial numbers

142361–143000)

• Reflex 2000mm f/11 (serial numbers n 200111–200310)

373