f10: Release Button to Use Dial

This option allows adjustments that are normally made by holding a button and rotating a command dial to be made by rotating the command dial after the button is released. At the default setting of No, the button must be pressed while the command dial is rotated. If Yes is selected, the setting can be changed by rotating the command dial after the button is released. Setting ends when the button is pressed again, the shutter-release button is pressed

halfway, or any of the I, E, M, ISO, QUAL, or WB button is pressed (if Auto bracketing is selected for the corresponding “+dials”

option as described on page 323, setting will also end when the Fn,

depth-of-field preview, or AE-L/AF-Lbutton is pressed). Except when No limit is selected for Custom Setting c2 Auto meter-off delay or an optional EH-5a or EH-5 AC adapter is used, setting will

also end when the exposure meters turn off.

U

328