Power switch

ALCD Illuminators

Holding the power switch in the D

position activates the exposure meters

and control panel backlights (LCD illuminators), allowing the display to be read in the dark. After the power s switch is released, the illuminator will

remain lit for six seconds (at default settings) while the camera exposure

meters are active or until the shutter is released or the power switch is rotated to Dagain.

AAuto Meter Off

At default settings, the shutter speed and aperture displays in the control panel and viewfinder will turn off if no operations are performed for about six seconds (auto meter off), reducing the drain on the battery. Press the shutter-release button halfway to reactivate the display in the viewfinder (pg. 54).

6 s

Exposure meters on Exposure meters off

Exposure meters on

The length of time before the exposure meters turn off automatically can be adjusted using Custom Setting c2 (Auto meter-off delay, pg. 296).

ACamera Off Display

If the camera is turned off with a battery and memory card inserted, the frame count and number of exposures remaining will be displayed (some memory cards may only display this information when the camera is on).

Control panel

48