Caring for the Camera

Storage and Maintenance

Storage

When the camera will not be used for an extended period, replace the moni tor cover, remove the battery, and store the battery in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store your camera with naphtha or camphor moth balls or in locations that:

are poorly ventilated or subject to humidities of over 60%

are next to equipment that produces strong electromagnetic fields, such as televisions or radios

are exposed to temperatures above 50 °C/122 °F (for example, near a space heater or in a closed vehicle on a hot day) or below –10 °C (14 °F)

Cleaning

 

Use a blower to remove dust, dirt, or sand then wipe gently with a soft,

 

dry cloth. After using the camera at the beach or seaside, wipe off any

Camera

sand or salt with a dry cloth lightly dampened with fresh water, then dry

body

thoroughly. The camera may be damaged if foreign matter gets inside

 

the camera body. Nikon cannot accept liability for damage caused by

 

dirt or sand.

 

These elements are made of glass and are easily damaged. Remove

Lens,

dust and lint with a blower. If using an aerosol blower, keep the can

mirror, and

vertical to prevent the discharge of liquid. To remove fingerprints and

viewfinder

other stains, apply a small amount of lens cleaner to a soft cloth and

 

clean with care.

 

Remove dust and lint with a blower. When removing fingerprints and

Monitor

other stains, wipe the surface lightly with a soft cloth or chamois leather.

 

Do not apply pressure, as this could result in damage or malfunction.

The Monitor

Should the monitor break, care should be taken to avoid injury caused by broken glass and to prevent liquid crystal from entering your eyes and mouth.

The Control Panel

Rarely, static electricity may cause the control panel to brighten or darken. This does not indicate a malfunction; the display will shortly return to normal.

Camera the for Caring—Notes Technical

193