Steps First—Introduction

Removing Memory Cards

Memory cards can be removed without loss of data when the camera is off. Before removing the memory card, wait for the green card access lamp next to the card slot cover to go out and then turn the camera off. Do NOT attempt to remove the card while the access lamp is on. Failure to observe this precaution could result in loss of data or in damage to

the camera or card. Open card slot cover and press the eject button to partially eject the card (￿). The card can then be removed by hand (￿). Do not push on the memory card while pressing the eject button. Failure to observe this precaution could damage the memory

card.

Access lamp

Note that memory cards may be hot after use. Observe due caution when removing memory cards from the camera.

No Memory Card

If no memory card is inserted in the camera when charged batteries are in place or the camera is powered

by an AC adapter,

will appear in the exposure-

count display.

 

22